KREOLAB PHOTOGRAPHIC LABORATORY SYSTEMS AND EQUIPMENT

Photographic Sinks for Color Prints and Black and White prints

Sinks are of a one-piece molded glass-fiber reinforced resin construction. This resin was specifically developed to be impervious to the corrosive effects of rapid fixers, color bleaches, iron chloride and other harsh chemicals used in photographic and graphic arts processes. We have never had a rusty sink. There are many Kreolab sinks in service which are in their third, fourth, or fifth decade of service. How do we know that? Because we get calls for plumbing parts for those sinks, and we are able to furnish those parts.
Sinks are pre-plumbed at the factory and delivered ready for installation. Plumbing packages are chosen to suit the application, and fixtures include appropriate water temperature blenders, water filters, faucets with hoses, vacuum breakers, standpipes and basket strainers. Controls are positioned for optimum handicap accessibility. All Kreolab stands and cabinets are laminated plywood.

5 INCH DEEP TRAY PROCESSING SINKS

Sink on Handicap Stand W/ Plumbing Pkg.	Sink on Handicap Stand No Plumbing Pkg.	Sink on Cabinet W/ Plumbing Pkg.	Sink on Cabinet, no Plumbing Pkg.	Sink on Stand w/ plumbing pkg.	Sink on Stand No Plumbing Pkg.	Inside Sink Dimensions	Floor Space* Width X Length
1745E1SH	1745SH	1745E1C	1745C	1745E1S	1745S	17 X 48.5	24 X 51.5
1765E2SH	1765SH	1765E2C	1765C	1765E2S	1765S	17 X 72.5	24 X 75.5
1775E2SH	1775SH	1775E2C	1775C	1775E2S	1775S	17 X 84.5	24 X 87.5
2445E1SH	2445SH	2445E1C	2445C	2445E1S	2445S	25 x 48.5	32 X 51.5
2455E1SH	2455SH	2455E1C	2455C	2455E1S	2455S	25 X 60.5	32 X 63.5
2465E2SH	2465SH	2465E2C	2465C	2465E2S	2465S	25 X 72.5	32 X 75.5
2475E2SH	2475SH	2475E2C	2475C	2475E2S	2475S	25 X 84.5	32 X 87.5
2485E2SH	2485SH	2485E2C	2485C	2485E2S	2485S	25 X 96.5	32 X 99.5
24105E2SH	24105SH	24105E2C	24105C	24105E2S	24105S	25 X 117	32 X 120
3045E1SH	*N/A	3045E1C	3045C	3045E1S	3045S	30.5 X 48.5	37.5 X 51.5
3055E1SH	*N/A	3055E1C	3055C	3055E1S	3055S	30.5 X 60.5	37.5 X 63.5
3065E2SH	*N/A	3065E2C	3065C	3065E2S	3065S	30.5 X 72.5	37.5 X 75.5
3075E2SH	*N/A	3075E2C	3075C	3075E2S	3075S	30.5 X 84.5	37.5 X 87.5
3085E2SH	*N/A	3085E2C	3085C	3085E2S	3085S	30.5 X 102.5	37.5 X 105.5
30105E2SH	*N/A	30105E2C	30105C	30105E2S	30105S	30.5 X 117	37.5 X 120

What is the purpose of plumbing packages?

Plumbing packages are used for temperature control on photo processes that require critical temperature control. Incoming water is blended to the proper temperature and circulated by jets around the tanks in the sink. This keeps the tanks at the proper temperature. Many photographic processes require developement at a controlled temperature for a specific time. In some parts of the country, incoming cold water temperatures may reach 86-90 degrees in the summer; if lower developing temperatures are required, a chiller must be installed in order to maintain the proper temperature.

• 1 each KTB251 - WATER TEMPERATURE BLENDER - Jet inlets, blended water, valve, jet control, vacuum breaker, and thermometer.
• 1 each K220S - FAUCET, two valve. Hot water valve, Cold water valve and spray hose.
• 1 each KWFP - WATER FILTER PANEL, HOT & COLD 25 MICRON WATER FILTERS WITH SHUT-OFF VALVES
• 1 each KFC110VB - FAUCET, single valve,. Vacuum breaker, KSE3 spout end for hose attachment, blended and filtered water from KTB250 blender.
• 1 each KSP1 - Combination 1 inch STANDPIPE and BASKET STRAINER when inverted.

One piece molded Kreonite sink 5" deep with 5" utility ledge on 7" high backsplash with the drain channeled bottom. Includes installed 1.5" drain with combination strainer, 1" standpipe and 7" tailpipe.

Factory installed plumbing fixtures, accessories, and support systems are priced separately. See Accessory Section.