KREOLAB PHOTOGRAPHIC LABORATORY SYSTEMS AND EQUIPMENT
COMBINATION SINKS
Sinks are of a one-piece molded glass-fiber reinforced resin construction. This resin was specifically
developed to be impervious to the corrosive effects of rapid fixers, color bleaches, iron chloride and other
harsh chemicals used in photographic and graphic arts processes.
Sinks are pre-plumbed at the factory and delivered ready for installation. Plumbing packages are chosen to
suit the application, and fixtures include appropriate water temperature blenders, water filters, faucets with
hoses, vacuum breakers, standpipes and basket strainers. Controls can be positioned for optimum
handicap accessibility.
Model No. on Cabinet
Model No. on Handicap Stand
Floor Space*
24-8SW 4 doors
24-8SWSH
96.25 x 33
24-9SW 4 doors
24-9SWSH
105.5 x 33
24-11SW 6 doors
24-11SWSH
132 X33
Tank processing sink, tray processing sink and round print washer molded in one continous unit,
mounted on a wood and plastic laminate cabinet base, pre-plumbed and fully equipped.
EQUIPPED WITH:
2 each KFC110VB - FAUCET, single valve, with vacuum breaker, KSE3 spout end for hose attachment,and
blended and filtered water from KTB251 blender.
1 each KTB 251 - Water Temperature Blender. Jet inlets, blended water (5" deep section only),
valve, jet control, vacuum breaker, thermometer.
1 each K220S - FAUCET, two valve. Hot water valve, Cold water valve and spray hose.
1 each KFR124VJ - Four jet wash system, 45 degree angle jets create whirling water flow. Includes
jet control valve and vacuum breaker.
1 each SPRAY SYSTEM - Spray bar, spray control valve.
1 each KDM - Drain manifold, 3 1.5 inch waste connections.
2 each KSP1 - Combination 1 inch STANDPIPE and BASKET STRAINER when inverted.
1 each KSP1 - Standpipe, 3 inch.
1 each KSP7 - Standpipe, 7 inch.
1 each KWFP - Hot & Cold Water Filters, 25 micron. Valves on filters for easy filter changing.
1 each Separator plate and standpipe over print washer drain.
24-8SW TOP INCLUDES:
Tank processing sink, 12" X 24.5" X 8.5" deep. (Accepts four KT110 1 gallon tanks,
or two KT132 or KT142 series 4.5 gallon tanks. Tanks not included.) KFC110VB faucet provides tempered water for
circulation around the tanks.
Tray Processing Sink, 49.5" left to right, 24.5" front to back. Jets circulate tempered water around the trays.
Round Print Washer, 25.5" diameter, 7" deep. Jets are at 45 degree angle for whirling water flow. Includes spray
bar to push prints below the surface.
24-9SW top includes:
DOES NOT INCLUDE HIGH SIDE PANELS.
1 - KFC110VB only.
Tray processing sink, 39.25" X 25.5" X 5" deep.
Print washer 26.5" diameter X 8" deep.
24-11SW TOP INCLUDES:
Tank processing sink, 36" X 24.5" X 8.5" deep. (accepts four KT132 0r KT142 series tanks. Tanks not included.)
KFC110VB faucet provides tempered water for circulation around the tanks.
Tray Processing Sink, 63.5" left to right, 24.5" front to back, 5" deep. Jets circulate tempered water around the trays.
Round Print Washer, 25.5" diameter, 7" deep. Jets are at 45 degree angle for whirling water flow. Includes spray
bar to push prints below the surface.
