KREOLAB PHOTOGRAPHIC LABORATORY SYSTEMS AND EQUIPMENT

Kreolab Print Washers for Color Prints, Black & White prints, and Graphic Arts Film

Kreolab Round Print Washers are plumbed with 4 jets which introduce fresh water to the print washer. These jets are angled 45 degrees to the side to produce a clockwise rotation of the water in the sink. The water is exhausted through the center standpipe of the sink. This assures that fresh water is constantly flowing by the prints as they rotate around the sink. The jet flow is controlled by a jet control valve which controls the water flow and the rotation. The jet system also includes a vacuum breaker to prevent back flow into the water supply. The spray bar pushes the prints downward as they rotate underneath the spray bar. This prevents prints from floating on the surface. The water flow from the spray bar is controlled by the spray bar control valve. Kreolab Print Washers are pre-plumbed at the factory and delivered ready for installation. Kreolab Print Washers are of a one-piece molded glass-fiber reinforced resin construction. This resin was specifically developed to be impervious to the corrosive effects of rapid fixers, color bleaches, iron chloride and other harsh chemicals used in photographic and graphic arts processes.

Kreolab Print Washers

Image

Kreolab Model Number
for Print Washer on
a Cabinet

Kreolab Model Number
for Print Washer on
a Handicap Stand

Kreolab Model Number
for Print Washer on
a Stand

Floor Space
Left to Right

Floor Space
Front to Back

24pwrs
LARGER IMAGE
24PWRC
CABINET
39" HEIGHT
24PWRSH
STAND
34" HEIGHT
BUT NOT ADA
24PWRS
STAND
39" HEIGHT
29"
32.5"
30pwrs
LARGER IMAGE
30PWRC
CABINET
39" HEIGHT
30PWRSH
STAND
34" HEIGHT
BUT NOT ADA
30PWRS
STAND
39" HEIGHT
33"
38"
30pwr-a
LARGER IMAGE
N/A
30PWRSH-A
HANDICAP STAND
34" HEIGHT
30" OPENING WIDTH
27" OPENING HEIGHT
N/A
33"
43"
48PWRSH
LARGER IMAGE
48PWRC
CABINET
39" HEIGHT
48PWRSH
HANDICAP STAND
34" HEIGHT
MEETS ADA
REQUIREMENTS
48PWRS
STAND
39" HEIGHT
48"
48"
48PWTWC
LARGER IMAGE
48PTWC
CABINET
THROUGH THE WALL WASHER
39" HEIGHT
N/A
N/A
48.5"
48.5"
48PTWSH
LARGER IMAGE
N/A
48PTWSH
HANDICAP STAND
THROUGH THE WALL WASHER
34" HEIGHT
WHEELCHAIR CUT-OUT
ONE SIDE
MEETS ADA
LIGHT COVERS FOR BOTH SIDES
WALL TRIM PIECES FOR BOTH SIDES
EITHER SIDE MAY BE LIGHT OR DARK
N/A
48"
48"

Cabinet and Stand colors are PLATINUM PLATINUM COLOR

Sink color is GRAY GREY

ALL KREOLAB SINKS WILL INCLUDE A KREOLAB STAND OR CABINET

EMAIL US AT kreolab@dunningphoto.com

We can translate email in Espanol, Deutsch, Italiano, Français, and Português.

KREOLAB, INC.

605 W. Needles St. Bixby, OK 74008 USA
Voice: 918/366-4917 Fax: 918/366-4918

RETURN TO KREOLAB MAIN PAGE